Condenser Tubes Specification:
Amardeep Steel LLP are specifically designed to efficiently condense process fluid of the outside of the tube. This application is widespread in heat exchangers, from being part of a condenser and evaporator refrigeration cycle in a chiller, to condensing steam in surface condensers, and everything in between. Copper Condenser Tubes are extensively used in sugar refineries for condensers and evaporators. Deoxidized copper is the standard material for transferring heat from steam to water or air because of their excellent resistance to corrosion by fresh water and their high thermal conductivities. These condenser tubes are commonly manufactured on plain Tubes of size : 15.88mm, 19.05mm and 25.40mm OD Tubes.
|
| Material [ MOC ] |
: |
Copper - SB111 UNS NO. C - 12200 |
| Finning |
: |
As per SB - 359 |
| Diameter |
: |
15.88mm, 19.05mm, 25.40mm |
| Wall thickness |
: |
1.00mm up to 1.32mm. |
| No. of Fins per Inch |
: |
30, 36, 40 FPI |
Condenser Pipes Chemical Composition:
| Cu | Fe | Pb | Mn | Ni | Zn |
|---|
| Min/Max | Rem | 1.0 - 1.8 | 0.05 | 1 | 9.0 - 11.0 | 1 |
| Nominals | 88.6000 | 1.4000 | - | - | 10.0000 | - |
Physical Properties
| Coefficient of Thermal Expansion | 9.5 10−6Per °F (68-572 F) |
| Density | 0.323 lb/in3 at 68 F |
| Electrical Conductivity | 9 %IACS @ 68 F |
| Electrical Resistivity | 115.0 ohms-cmil/ft @ 68 F |
| Melting Point Liquid US | 2100 F |
| Melting Point Solid US | 2010 F |
| Modulas of Elasticity in Tension | 18000 ksi |
| Modulas of Rigidity | 6800 ksi |
| Specific Gravity | 8.94 |
| Specific Heat Capacity | 0.09 Btu/lb/°F At 68 F |
| Thermal Conductivity | 26.0 Btu |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 mm and Max OD 100 mm |
| ROUND RODS/RODS | 8mm To 100 mm |
| HEX | 10mm To 60mm |
| SQUARE | 10mm To 60mm |
| FLAT | 10mm Min Thickness and max Width 120mm |
| BILLETS | Up to 200 mm |
| INGOTS | AS per Specification |
Condenser Equivalent Specifications:
| SPECIFICATIONS | DESIGNATION |
|---|
| ISO | CuNi10Fe1Mn | CuNi5Fe1Mn |
| Europen | CuNi10Fe1Mn | CuNi5Fe1Mn |
| BS | CN 102 |
| JIS | C 7060 |
| Russian | MNZMo10-1-1 |
Physical Properties:
| Coefficient of Thermal Expansion | 9.5 10−6Per °F (68-572 F) |
| Density | 0.323 lb/in3 at 68 F |
| Electrical Conductivity | 9 %IACS @ 68 F |
| Electrical Resistivity | 115.0 ohms-cmil/ft @ 68 F |
| Melting Point Liquid US | 2100 F |
| Melting Point Solid US | 2010 F |
| Modulas of Elasticity in Tension | 18000 ksi |
| Modulas of Rigidity | 6800 ksi |
| Specific Gravity | 8.94 |
| Specific Heat Capacity | 0.09 Btu/lb/°F At 68 F |
| Thermal Conductivity | 26.0 Btu |
Sizes Available
| HOLLOW RODS | Min Bore Size 20 mm and Max OD 100 mm |
| ROUND RODS/RODS | 8mm To 100 mm |
| HEX | 10mm To 60mm |
| SQUARE | 10mm To 60mm |
| FLAT | 10mm Min Thickness and max Width 120mm |
| BILLETS | Up to 200 mm |
| INGOTS | AS per Specification |